View LTN101NT06-2_4811357.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

doc.no. rev.no page / 29 LTN101NT06-2 1 04-a00-g-100730 samsung secret approval to date : general : july. 30, 2010 samsung tft-lcd model no. : LTN101NT06-2 samsung tft-lcd model no. : LTN101NT06-2 note : extension code [ xxx ] ltn101nt06[xxx] surface type [ anti-glare ] the information described in this spec is preliminar y and can be changed without prior notice. approved by : prepared by : andrew, cho samsung electronics co., ltd. application engineer part 1, lcd business dep. www.datasheet.net/ datasheet pdf - http://www..co.kr/
doc.no. rev.no page / 29 LTN101NT06-2 2 04-a00-g-100730 samsung secret approval contents revision history general description 1. absolute maximum ratings 1.1 absolute ratings of environment 1.2 electrical absolute ratings 2. optical characteristics 3. electrical characteristics 3.1 tft lcd module 3.2 backlight unit 3.3 led driver 4. block diagram 4.1 tft lcd module 4.2 led placement structure 5. input terminal pin assignment 5.1 input signal & power 5.2 lvds interface 5.3 timing diagrams of lvds for transmitting 5.4 input signals, basic display colors and gray sc ale of each color. 5.5 pixel format 6. interface timing 6.1 timing parameters 6.2 timing diagrams of interface signal 6.3 power on/off sequence 7. outline dimension 8. packing 9. markings & others 10. general precautions - - - - - - - - - - - - - - - - - - - ( 3 ) - - - - - - - - - - - - - - - - - - - ( 4 ) - - - - - - - - - - - - - - - - - - - ( 5 ) - - - - - - - - - - - - - - - - - - - ( 7 ) - - - - - - - - - - - - - - - - - - - ( 10 ) - - - - - - - - - - - - - - - - - - - ( 13 ) - - - - - - - - - - - - - - - - - - - ( 14 ) - - - - - - - - - - - - - - - - - - - ( 20 ) - - - - - - - - - - - - - - - - - - - ( 23 ) - - - - - - - - - - - - - - - - - - - ( 25 ) - - - - - - - - - - - - - - - - - - - ( 26 ) - - - - - - - - - - - - - - - - - - - ( 28 ) www.datasheet.net/ datasheet pdf - http://www..co.kr/
doc.no. rev.no page / 29 LTN101NT06-2 3 04-a00-g-100730 samsung secret approval revision history revision history the approval spec was issued. all a00 jul.30, 2010 summary page revision no. date www.datasheet.net/ datasheet pdf - http://www..co.kr/
doc.no. rev.no page / 29 LTN101NT06-2 4 04-a00-g-100730 samsung secret approval general description description ltn101nt06 is a color active matrix tft (thin film transistor) liquid crystal display (lcd) that uses amorphous silicon tft as switching devices. this model is composed of a tft lcd panel, a driver circuit and a backlight uni t. the resolution of a 10.1" contains 1024 x 600 pixels and can display up to 262,144 col ors. 6 o'clock direction is the optimum viewing angle. applications ? notebook pc ? if the usage of this product is not for pc applica tion, but for others, please contact sec general information features ? high contrast ratio ? wsvga (1024 x 600 pixels ) resolution ? fast response ? led back light with embedded led driver ? de (data enable) only mode ? 3.3v lvds interface ? onboard eedid chip ? green product (rohs compliant) haze 25, hard-coating 3h surface treatment normally white display mode mm 0.2175(h) x 0.2088(v) (typ.) pixel pitch rgb vertical stripe pixel arrangement pixel 1024 x 600 number of pixel 262,144 display colors a-si tft active matrix driver element mm 222.72(h) x 125.28(v) ( 10.1 wide diagonal ) display area note unit specification item www.datasheet.net/ datasheet pdf - http://www..co.kr/
doc.no. rev.no page / 29 LTN101NT06-2 5 04-a00-g-100730 samsung secret approval 1. absolute maximum ratings 1.1 environmental absolute ratings note (1) temperature and relative humidity range are shown in the figure below. 95 % rh max. (40 c 3 ta) maximum wet - bulb temperature at 39 o c or less. (ta > 40 c ) no condensation (2) 2ms, half sine wave, one time for x, y, z. (3) 5 - 500 hz, random vibration, 30min for x, y, z . (4) at testing vibration and shock, the fixture in holding the module to be tested have to be hard and rigid enough so that the module would not be twisted or bent by the fixture. 0 20 40 60 80 100 -40 -20 0 20 40 60 80 5 90 operating range storage range relative humidity ( %rh) temperature ( o c) (3),(4) g 2.41 - vnop vibration (non-operating) (2),(4) g 240 - snop shock ( non-operating ) (1) c 50 0 topr operating temperate (temperature of glass surface) (1) c 60 -20 tstg storage temperate note unit max. min. symbol item ( 40,90 ) ( 50,50.4 ) ( 60,27.7 ) mechanical information mm 143.5 143.0 142.5 200 5.2 235.5 max. g - - weight (1) mm - - depth (d) vertical (v) mm 235.0 234.5 horizontal (h) module size note unit typ. min. item note (1) measurement condition of outline dimensio n . equipment : bernier calipers . push force : 500g f (minimum) www.datasheet.net/ datasheet pdf - http://www..co.kr/
doc.no. rev.no page / 29 LTN101NT06-2 6 04-a00-g-100730 samsung secret approval 1.2 electrical absolute ratings (1) tft lcd module note (1) within ta (25 2 c ) v dd =3.3v, v ss = gnd = 0v (1) v v dd + 0.3 v dd - 0.3 v dd power supply voltage (1) v v dd + 0.3 v dd - 0.3 v in logic input voltage note unit max. min. symbol item (2) back-light unit note 1) permanent damage to the device may occur if maximum values are exceeded functional operation should be restricted to the co nditions described under normal operating condition s. ta = 25 2 c 3.2 25.6 typ. (1) v - - f l led voltage (1) ma - - i l led current note unit max. min. symbol item www.datasheet.net/ datasheet pdf - http://www..co.kr/
doc.no. rev.no page / 29 LTN101NT06-2 7 04-a00-g-100730 samsung secret approval 2. optical characteristics the following items are measured under stable condi tions. the optical characteristics should be measured in a dark room or equivalent sta te with the methods shown in note (5). measuring equipment : topcon sr-3 * ta = 25 2 c, v dd =3.3v, fv= 60hz, f dclk =54.03mhz, i l = 25.6 ma % - 45 - cg color gamut - degrees - cd/m 2 msec - unit (6) 1.7 - - d l 13 points white variation - 30 - f l - 10 - f h ver. - 40 - q h (1), (5) sr-3 - 40 - cr 3 10 at center q l hor. viewing angle 0.359 0.329 0.299 w y 0.343 0.313 0.283 w x white 0.153 0.123 0.093 b y 0.190 0.160 0.130 b x blue 0.590 0.560 0.530 g y 0.364 0.334 0.304 g x green 0.375 0.345 0.315 r y (1), (5) sr-3 0.603 0.573 0.543 r x red color chromaticity ( cie ) (1), (4) - 200 170 y l , ave average luminance of white (5 points) (1), (3) 25 16 - t rt response time at ta ( rising + falling ) (1), (2), (5) - - 300 normal viewing angle f = 0 q = 0 cr contrast ratio (5 points) note max typ. min. condition symbol item www.datasheet.net/ datasheet pdf - http://www..co.kr/
doc.no. rev.no page / 29 LTN101NT06-2 8 04-a00-g-100730 samsung secret approval note 3) definition of response time : note 1) definition of viewing angle : viewing angl e range(10 c/r) average luminance of white ( y l,ave ) y l4 + y l5 + y l7 + y l9 + y l10 y l,ave = 5 note 4) definition of average luminance of white : measure the luminance of white at 5 points. : test point view area 150 300 450 (lines) 256 512 768 7 5 4 9 10 6 oclock direction normal line q l q r f h f l 12 oclock direction q r =90 o q l =90 o f = 0 o , x x' y' y q = 0 o f h = 90 o f l = 90 o display data black(tft on) white(tft off) white(tft off) optical response 100% 90% 10% 0% t r t f time cr = cr(4) + cr(5) + cr(7) + cr(9) + cr(10) note 2) definition of contrast ratio (cr) : rati o of gray max (gmax) ,gray min (gmin) at 5 points(4, 5, 7, 9, 10) 5 points : , , , , at the figure of note (6). 4 9 10 7 5 www.datasheet.net/ datasheet pdf - http://www..co.kr/
doc.no. rev.no page / 29 LTN101NT06-2 9 04-a00-g-100730 samsung secret approval [ optical characteristics measurement setup ] center of the screen tft-lcd module lcd panel photo-detector ( topcon sr-3 ) 50 cm field = 2 note 5) after stabilizing and leaving the panel a lone at a given temperature for 30 min , the measur ement should be executed. measurement should be executed in a stable, windless,and dark room. 30 min after lighting the backlight. this should be measured in the center of screen. if current : 25.6ma environment condition : ta = 25 2 c maximum luminance of 13 points minimum luminance of 13 points : test point 256 512 768 150 300 450 (lines) 10mm 10mm 10mm 10mm 4 2 5 3 6 8 10 9 13 12 11 1 7 note 6) definition of 13 points white variation ( d l ), cr variation( c ver ) [ ~ ] 1 13 d l = www.datasheet.net/ datasheet pdf - http://www..co.kr/
doc.no. rev.no page / 29 LTN101NT06-2 10 04-a00-g-100730 samsung secret approval 3. electrical characteristics 3.1 tft lcd module note (1) display data pins and timing signal pins should be connected.( gnd = 0v ) (2) f v = 60hz, f dclk =54.2 mhz, v dd = 3.3v , dc current. (3) power dissipation pattern *a) white pattern *b) mosaic pattern display brightest gray level display darkest gray level view area ta= 25 2 c (2),(3)*c ma - 210 - v. stripe current of power supply (2),(3)*b ma - 175 - mosaic (2),(3)*a ma - 175 - i dd white (4) a 1.5 - - i rush rush current - mhz - 54.2 - f dclk main frequency khz - 40.38 - f h hsync frequency hz - 60 - fv vsync frequency mv - - -100 v il low v cm = +1.2v mv +100 - - v ih high differential input voltage for lvds receiver threshold v 3.6 3.3 3.0 v dd voltage of power supply note unit max. typ. min. symbol item www.datasheet.net/ datasheet pdf - http://www..co.kr/
doc.no. rev.no page / 29 LTN101NT06-2 11 04-a00-g-100730 samsung secret approval *c) 1dot vertical stripe pattern 4) rush current measurement condition v dd rising time is 470us 3.3v gnd 0.9v dd 0.1v dd 470us 3.3v 12v v dd ( lcd input) control signal (high to low) m2 2sk1399 m1 2sk1059 r2 1k c2 10000pf c3 1uf r3 47k r1 47k fuse c1 1uf r g b r g b r g b r g g b r g b r g b r g r g b r g b r g b r g g b r g b r g b r g r r www.datasheet.net/ datasheet pdf - http://www..co.kr/
doc.no. rev.no page / 29 LTN101NT06-2 12 04-a00-g-100730 samsung secret approval 3.2 led driver @200nit, w/ driver w 2.45 1.9 - p power consumption vf x 18 leds v - 19.2 - vp led array voltage v 3.4 3.2 3.0 vf led forward voltage ma 26 25.6 25 if led forward current note unit max. typ. min. symbol item 3.3 led driver ta= 25 2 c - led driver manufacturer : rhichitec pwm freq: 1khz~10khz % 100 - 10 d duty ratio 200hz~1khz 100 - 5 v 0.5 0 0 off v 5.0 3.3 2 on en control level ma - 160 - i input current v 5.0 3.3 2 on pwm control level vin=7~20v, blim=pwm 0v~3.3v khz 10 1 - f blim external pwm dimming control frequency (blim) v 0.5 0 0 off v 21 12 7 v in input voltage note unit max. typ. min. symbol item www.datasheet.net/ datasheet pdf - http://www..co.kr/
doc.no. rev.no page / 29 LTN101NT06-2 13 04-a00-g-100730 samsung secret approval 4. block diagram 4.1 tft lcd module 4.2 led placement structure input connector lvds input/rsds output timing controller 10.1 wsvga (1024*3*600) tft-lcd panel source driver ic dc-dc converter control signal vcom gamma dvdd avdd von/voff video signal gamma generator i-pex 20455-040-e or compatible lvds source pcb rsds edid eeprom i 2 c bus vcom generator gate ic d13 d14 d15 d16 d17 d18 d7 d8 d9 d10 d11 d12 anode cathode d1 d2 d3 d4 d5 d6 www.datasheet.net/ datasheet pdf - http://www..co.kr/
doc.no. rev.no page / 29 LTN101NT06-2 14 04-a00-g-100730 samsung secret approval 5. input terminal pin assignment 5.1. input signal & power (lvds, connector : i-pex 20455-040e-## or equivalent ) no connect nc 20 ground vss 19 positive +lvds odd differential clk rxockin+ 18 negative -lvds odd differential clk rxockin- 17 ground vss 16 positive +lvds differential data (odd b2-b5,hs,vs,de) rxoin2+ 15 negative -lvds differential data (odd b2-b5,hs,vs,de) rxoin2- 14 ground vss 13 positive +lvds differential data (odd g1-g5,b0-b1) rxoin1+ 12 negative -lvds differential data (odd g1-g5,b0-b1) rxoin1- 11 ground vss 10 positive +lvds differential data (odd r0-r5, g0) rxoin0+ 9 negative -lvds differential data (odd r0-r5, g0) rxoin0- 8 edid data input data_edid 7 edid clock input clk_edid 6 no connect nc 5 edid +3.3v power vedid 4 power supply +3.3v vdd 3 power supply +3.3v vdd 2 no connect nc 1 no connect nc 30 no connect nc 29 no connect nc 28 no connect nc 27 no connect nc 26 no connect nc 25 no connect nc 24 no connect nc 23 no connect nc 22 no connect nc 21 remarks polarity function symbol no. www.datasheet.net/ datasheet pdf - http://www..co.kr/
doc.no. rev.no page / 29 LTN101NT06-2 15 04-a00-g-100730 samsung secret approval led power supply 7v-21v vled 40 led power supply 7v-21v vled 39 led power supply 7v-21v vled 38 no connect nc 37 led enable pin (+3v input, +5v tolerance) bl_on 36 system pwm signal input s_pwmin 35 no connect nc 34 led ground vled_gnd 33 led ground vled_gnd 32 led ground vled_gnd 31 remarks polarity function symbol no. www.datasheet.net/ datasheet pdf - http://www..co.kr/
doc.no. rev.no page / 29 LTN101NT06-2 16 04-a00-g-100730 samsung secret approval 5.2 lvds interface : transmitter ds90cf363 or comp atible note : the lcd module uses a 100ohm resistor betwee n positive and negative lines of each receiver input. pin no. name rgb signal pin no. name rgb signal 51 txin0 r0 14 txin14 g5 52 txin1 r1 15 txin15 b0 54 txin2 r2 19 txin18 b1 55 txin3 r3 20 txin19 b2 56 txin4 r4 22 txin20 b3 3 txin6 r5 23 txin21 b4 4 txin7 g0 24 txin22 b5 6 txin8 g1 27 txin24 hsync 7 txin9 g2 28 txin25 vsync 11 txin12 g3 30 txin26 de 12 txin13 g4 31 txclkin clock graphics controller 18-bit ds90cf383 integrated ic i-pex 20455-040e red0 red1 red2 red3 red4 red5 green0 hsync enable green1 green2 green3 green4 green5 blue0 blue1 blue2 blue3 blue4 blue5 vsync clock 51 52 54 55 56 3 4 6 7 11 12 14 15 19 20 22 23 24 27 28 30 31 48 47 46 45 42 41 40 39 8 9 11 12 14 15 17 18 rxin0- rxin0+ rxin1- rxin1+ rxin2- rxin2+ rxclkin- rxclkin+ txout0- txout0+ txout1- txout1+ txout2- txout2+ txclkout- txclkout+ 100 w 100 w 100 w 100 w lvds interface www.datasheet.net/ datasheet pdf - http://www..co.kr/
doc.no. rev.no page / 29 LTN101NT06-2 17 04-a00-g-100730 samsung secret approval 5.3 timing diagrams of lvds for transmission lvds receiver : integrated t-con rxout20 rxout19 rxout17 rxout18 rxout16 rxout15 rxout14 rxout13 rxout12 rxout10 rxout11 rxout9 rxout8 rxout7 rxout6 rxout5 rxout3 rxout4 rxout2 rxout1 rxout0 t t/7 vsync b2 hsync b5 b3 b4 g4 b1 g5 b0 g3 g2 g1 g0 r4 r5 r2 r1 r0 txclk out rxclk in rx in1 rxin0 rx in2 de r3 www.datasheet.net/ datasheet pdf - http://www..co.kr/
doc.no. rev.no page / 29 LTN101NT06-2 18 04-a00-g-100730 samsung secret approval 5.4 input signals, basic display colors and gray s cale of each color note 1) definition of gray : rn: red gray, gn: green gray, bn: blue gray (n=gray level) note 2)input signal: 0 =low level voltage, 1=high l evel voltage b3 ~ b60 : : : : : : : : : : : : : : : : : : : b2 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 - b1 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 dark b0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 black gray scale of blue g61 0 0 0 0 0 0 1 1 1 1 0 1 0 0 0 0 0 0 : : : : : : : : : : : : : : : : : : : g3 ~ g60 : : : : : : : : : : : : : : : : : : : g2 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 - g1 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 dark g0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 black gray scale of green b63 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 blue b62 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 light b61 1 1 1 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 : : : : : : : : : : : : : : : : : : : g63 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 green g62 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 0 light r63 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 red r62 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0 light r61 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 0 1 : : : : : : : : : : : : : : : : : : : r3 ~ r60 : : : : : : : : : : : : : : : : : : : r2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 - r1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 dark r0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 black gray scale of red - 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 white - 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 yellow - 1 1 1 1 1 1 0 0 0 0 0 0 1 1 1 1 1 1 magenta - 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 red - 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 cyan - 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 green - 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 blue - 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 black basic colors b5 45 b3 b2 b1 b0 g5 g4 g3 g2 g1 g0 r5 r4 r3 r2 r1 r0 blue green red gray scale level data signal display color www.datasheet.net/ datasheet pdf - http://www..co.kr/
doc.no. rev.no page / 29 LTN101NT06-2 19 04-a00-g-100730 samsung secret approval 5.5 pixel format in the display r g b r g b 1 r g b r g b r g b r g b r g b r g b ltn101nt06 panel line 1 line 600 1024 www.datasheet.net/ datasheet pdf - http://www..co.kr/
doc.no. rev.no page / 29 LTN101NT06-2 20 04-a00-g-100730 samsung secret approval 6. interface timing 6.1 timing parameters 6.2 timing diagrams of interface signal clocks - 1024 - thd display period horizontal active display term clocks 1600 1400 1200 th cycle one line scanning time lines - 600 - tvd display period vertical active display term lines - 673 - tv cycle frame frequency note unit max. typ. min. symbol item signal t vd t v de t h t c t hd valid display data ( 1024 clocks) dclk de data signals www.datasheet.net/ datasheet pdf - http://www..co.kr/
doc.no. rev.no page / 29 LTN101NT06-2 21 04-a00-g-100730 samsung secret approval 6.3 power on/off sequence : to prevent a latch-up or dc operation of the lcd module, the power on/off sequence should be as the diagram below. power on/off sequence enable signal for led driver (backlight on/off) pwm for led driver (dimming signal) power supply vdd signals led power (v in ) 0 v 0.9 v dd 0.9 v dd 0v valid t3 t1 t2 t4 0.1 v dd 0.1 v dd t6 t5 0.1 led v in t12 t13 t9 t7 t10 t8 t11 0.9 led v in 0.9 led v in 0.1 led v in delay from led driver vin rising time 90% to pwm on 0 t10 delay from pwm off to led driver vin falling time 1 0%, must keep rule 0 t11 delay from pwm on to b/l enable on, must keep rule 0 t12 delay from b/l enable off to pwm off 0 t13 led v in falling time from 90% to 10% 0.5 t9 10 led v in rising time from 10% to 90% 0.5 t8 10 v dd falling time from 90% to 10% 0 t7 10 delay from valid data off to b/l disable at power o ff 200 t6 delay from valid data to b/l enable at power on 200 t5 v dd off time for windows restart 500 t4 delay from valid data off to v dd off at power off 0 t3 50 delay from v dd to valid data at power on 0 t2 50 v dd rising time from 10% to 90% 0.5 t1 10 remarks timing (ms) power sequence & timing parameters www.datasheet.net/ datasheet pdf - http://www..co.kr/
doc.no. rev.no page / 29 LTN101NT06-2 22 04-a00-g-100730 samsung secret approval 6.3 power on/off sequence note. (1) the supply voltage of the external system for t he module input should be the same as the definition of v dd . (2) apply the lamp voltage within the lcd operation range. when the back-light turns on before the lcd operation or the lcd turns off befor e the back-light turns off, the display may momentarily become white. (3) in case of v dd = off level, please keep the level of input signals on the low or keep a high impedance. (4) t4 should be measured after the module has bee n fully discharged between power off and on period. (5) interface signal shall not be kept at high impe dance when the power is on. www.datasheet.net/ datasheet pdf - http://www..co.kr/
doc.no. rev.no page / 29 LTN101NT06-2 23 04-a00-g-100730 samsung secret approval 7. mechanical outline dimension www.datasheet.net/ datasheet pdf - http://www..co.kr/
doc.no. rev.no page / 29 LTN101NT06-2 24 04-a00-g-100730 samsung secret approval www.datasheet.net/ datasheet pdf - http://www..co.kr/
doc.no. rev.no page / 29 LTN101NT06-2 25 04-a00-g-100730 samsung secret approval 8. packing 1. carton(internal package) (1) packing form corrugated fiberboard box and corrugated pad form as shoc k absorber (2) packing method note 1)total weight : approximately 7 kg 2) acceptance number of piling : 30 sets 3) carton size : 450(w) 340(d) 230(h) packing case packing pallet box cushion top panel cushion bottom packing case pallet plastic www.datasheet.net/ datasheet pdf - http://www..co.kr/
doc.no. rev.no page / 29 LTN101NT06-2 26 04-a00-g-100730 samsung secret approval (3)packing material 9. markings & others a nameplate bearing followed by is affixed to a shi pped product at the specified location on each product. (1)parts number : ltn101nt06 (2)revision code : 3 letters (3)lot number : x x x x xxx xx x 2 1 set carton 4 2 pcs pictorial marking 3 1 set packing case (inner box) included shock absorber 2 30 static electric protective sack 1 quantity part name no panel number cell id lot id month year product code line sec revision code (5) nameplate indication parts name : ltn101nt06 lot number : xxxxxxxxxx inspected work week :1008(2010 year, 8nd week) 40 mm 80 mm ltn101nt06 1008 xxxxxxxxxx 2 made in china www.datasheet.net/ datasheet pdf - http://www..co.kr/
doc.no. rev.no page / 29 LTN101NT06-2 27 04-a00-g-100730 samsung secret approval (6) packing small box attach device : ltn101nt06 type : 2 quantity : 30 pcs co6040001 high voltage caution high voltage caution label high voltage caution risk of electric shock disconnect the electric power before service 10mm 70mm this cover contains fluorescent lamp. please follow local ordinances or regulations for its disposal www.datasheet.net/ datasheet pdf - http://www..co.kr/
doc.no. rev.no page / 29 LTN101NT06-2 28 04-a00-g-100730 samsung secret approval 10. general precautions 1. handling (a) when the module is assembled, it should be atta ched to the system firmly using every mounting holes. be careful not to twist and bend the modules. (b) refrain from strong mechanical shock and / or a ny force to the module. in addition to damage, this may cause improper operation or damag e to the module and ccft back-light. (c) note that polarizers are very fragile and could be easily damaged. do not press or scratch the surface harder than a hb pencil lead. (d) wipe off water droplets or oil immediately. i f you leave the droplets for a long time, staining and discoloration may occur. (e) if the surface of the polarizer is dirty, cl ean it using some absorbent cotton or soft cloth. (f) the desirable cleaners are water, ipa (isoprop hyl alcohol) or hexane. do not use ketone type materials(ex. acetone), ethy l alcohol, toluene, ethyl acid or methyl chloride. it might permanent damage to the polarize r due to chemical reaction. (g) if the liquid crystal material leaks from the panel, it should be kept away from the eyes or mouth . in case of contact with hands, legs or clot hes, it must be washed away thoroughly with soap. (h) protect the module from static , it may cause d amage to the c-mos gate array ic. (i) use fingerstalls with soft gloves in order to k eep display clean during the incoming inspection and assembly process. (j) do not disassemble the module. (k) do not pull or fold the lamp wire. (l) do not adjust the variable resistor which is lo cated on the back side. (m) protection film for polarizer on the module s hall be slowly peeled off just before use so that the electrostatic charge can be minimized. (n) pins of i/f connector shall not be touched dir ectly with bare hands. www.datasheet.net/ datasheet pdf - http://www..co.kr/
doc.no. rev.no page / 29 LTN101NT06-2 29 04-a00-g-100730 samsung secret approval 2. storage (a) do not leave the module in high temperature, an d high humidity for a long time. it is highly recommended to store the module with t emperature from 0 to 35 c and relative humidity of less than 70%. (b) do not store the tft-lcd module in direct sunli ght. (c) the module shall be stored in a dark place. it is prohibited to apply sunlight or fluorescent light during the store. 3. operation (a) do not connect,disconnect the module in the power on condition. (b) power supply should always be turned on/off b y following item 6.3 power on/off sequence . (c) module has high frequency circuits. sufficien t suppression to the electromagnetic interference shall be done by system manufacturers. grounding and shielding methods may be important to minimize the interference. (d) the cable between the back-light connector an d its inverter power supply shall be a minimized length and be connected directly . the l onger cable between the back-light and the inverter may cause lower luminance of lamp( ccft) and may require higher startup voltage (vs). (e) the standard limited warranty is only applicabl e when the module is used for general notebook applications. if used for purposes other t han as specified, sec is not to be held reliable for the defective operations. it is s trongly recommended to contact sec to find out fitness for a particular purpose. 4. others (a) ultra-violet ray filter is necessary for outdoo r operation. (b) avoid condensation of water. it may result in i mproper operation or disconnection of electrode. (c) do not exceed the absolute maximum rating value . ( the supply voltage variation, input voltage variation, variation in part contents and environmental temperature, so on) otherwise the module may be damaged. (d) if the module displays the same pattern continu ously for a long period of time,it can be the situation when the image sticks to the screen. (e) this module has its circuitry pcbs on the rear side and should be handled carefully in order not to be stressed. www.datasheet.net/ datasheet pdf - http://www..co.kr/

▲Up To Search▲

Price & Availability of LTN101NT06-2

	To Download LTN101NT06-2 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .